1 / 9
Lining the interior with Dynamat brings the noise levels down significantly. Before any Dynamat is applied the floor pan was made free of rust and painted with POR 15. Note: Surprisingly, when the old rug and pad was removed the floor pan showed very little rust.
2 / 9
Provides a good look at the driver side front floor pan. Again, there was very little surface rust, especially for a 30+-year-old car.
3 / 9
A good look at the driver side rear floor pan, transmission tunnel.
4 / 9
This image shows how the back floor pan was cleaned up, surface rust removed, and a coat of Por15 applied.
5 / 9
A view of the front floor pan after clean up, surface rust removed, and a coat of Por15 added.
6 / 9
Another closer view of the front floor with POR 15 application.
7 / 9
Installation of Dynamat on driver side.
8 / 9
Installation of Dynamat on passenger side.
9 / 9
Installation of Dynamat over the entire floor pan.